The quality of science education teachers’ work determines the effectiveness of education and science education programs in many respects. Given that the results of students are not the same for teachers with the same formal characteristics, we formulate the research problem: when assessing the effectiveness of teachers, we can distinguish a system of indicators that affect the effectiveness of education and educational programs. The purpose of this article is to analyze the quality of work of science education teachers in the Kirov region and their teaching practice. The leading research methods in this case are the concept of the third international study of teaching and learning “Teaching and Learning International Survey”, collecting data obtained through a questionnaire of science education teachers, analyzing the quality of work and conditions of pedagogical practices, statistical processing of the research results, modeling and conversations with heads of secondary schools and representatives of executive authorities. As a result of a study conducted in 2017–2020, in which 1146 teachers of secondary schools of the European part of Russia took part, including 310 science education teachers, the author of the article found: the workload of a school teacher of science education is 0.65; subjects teachers spend on average 42.2 hours every week to perform their official duties, urban teachers have more work than rural teachers; with age, teachers of science education have a partial redistribution of labor activity from teaching to administrative work; actual teaching takes 53% of working time in the structure of workload for teachers of science education; teachers evaluate the completeness of their knowledge upon completion of training at the level of 38% of the required level for performing labor activities; there is a predominant share of teachers with a moderate level of need for knowledge in most areas of professional development. The results of the study allow us to develop a set of group measures for training and methodological support of science education teachers. These measures should take into account the specifics of workload and the characteristics of professional deficits.

This paper represents a revolutionary advancement in our knowledge of postgraduate education which is of increasing significance to national knowledge systems. South African universities produce 26 doctoral graduates for every one million citizens. This means that the low doctoral graduates’ throughput is a huge challenge in South Africa and needs to be addressed. The paper investigated the challenges experienced by postgraduate students (Honors) at an institution of higher education in Limpopo province of South Africa. The group studied consisted of postgraduate students (Honors) from the Department of Mathematics Science and Technology Education, Faculty of Education. Using a qualitative approach, open-ended questionnaire and interview data were collected from eight participants. Data were analyzed thematically and the results revealed that students find it difficult to walk the landmine-infested postgraduate education road without means to shield themselves from the subsequent explosion. The study recommends aspects that improve postgraduate programs’ performance in the Department of Mathematics Science and Technology Education.

This is a preliminary paper about a large research project on social mathematics. It proposes points mathematics, a variant of social mathematics, as a viable context for teaching mathematics to adults. Points mathematics, focuses on observing, representing and investigating patterns, regularities and quantitative relationships stemming from convertible points, that businesses offer to their customers/clients for the purpose of encouraging loyalty and for boosting up sales in competitive markets. Using ten illustrative examples, the paper asserts that points mathematics provides practical, realistic context for teaching fundamental mathematics concepts and skills to adult students. These include, but not limited to, the four operations of mathematics (addition, division, subtraction and multiplication), variable, linear equation, graph, rates, percent, ratio, patterns and proportion. The paper is grounded in the theory of realistic mathematics education (RME), that posits that the teaching and learning of mathematics should be contextually-based; entails explaining and solving contextual problems; and establishing high-level interactive relationship between learning and teaching. The paper concludes with three recommendations to guide mathematics teachers of adults who want to implement points mathematics as part of their mathematics curriculum. However, the paper is the first phase of a large research project that explores social mathematics and how it could be integrated in mathematics curricular contents for adult students.

Using engineering design to teach science requires teachers to engage in noticing, interpreting, and responding to students’ needs in real-time. While research has begun to focus on how elementary teachers do so, less is known about how teachers instructionally support and optimize students’ ideas through engineering design feedback. In this study we investigate what instructional moves two elementary teachers’ employ to leverage students’ ideas and reasoning and create opportunities for students to exchange design feedback. Data were gathered using classroom observations of teachers’ implementations of a design task focused on sound and energy transformation. Observations were coded for teachers’ use of high-leverage practices, and event maps were created to chronicle teachers’ implementation of the task from start to finish. Event maps were analyzed and compared for discrete instructional activities and modes of classroom organization that supported opportunities for feedback. Findings suggested that while teachers used similar instructional moves, how and when they created opportunities for student design feedback differed, resulting in diverse ways of assessing and supporting students’ understandings. Implications suggest design feedback as both a purposeful and naturally present phenomenon throughout the design process, reflective of the nature of engineering design.

Preservice mathematics teachers' beliefs about actions related to the use of the technological tools in teaching mathematics may affect how they are going to use them in their classroom activities. However, there is a limited evidence of what beliefs they hold on their intended actions of using technological tools in teaching mathematics. This study presents two preservice high school mathematics teachers' actional beliefs related to their intended actions in teaching geometric transformations (GTs) using Geometer's Sketchpad (GSP). The study comprised of a series of five task-based qualitative interviews with each of two senior undergraduate preservice teachers at a medium-sized public university in the Rocky Mountain Region of the United States. This study used a radical constructivist grounded theory (RCGT) with five assumptions—symbiosis, voice, cognition, adaptation, and praxis as a theoretical framework to guide the study process. The thematic findings of the study included four in vivo categories of their beliefs associated with actions of teaching GTs with GSP – assessment of student learning, engaging students in a group activity in exploring GTs with GSP, engaging students in individual activity in exploring GTs with GSP, and exploring GTs with GSP as 'suck it up and do it.' Pedagogical implications of these categories have been discussed.

The study examines the effectiveness of employing semiosis in the teaching and learning of the Quadratic Equation. The first goal is to compare results of De Saussure and Peirce models within the semiotic theory. The second goal is to determine the commonest effective semiotic objects student teachers mostly employ to solve for the roots in quadratic equations. This research method was mixed methods concurrent and adopted both quantitative and qualitative approach. The instruments for the study were teacher-made tests and interview guide structured on the likert scale. In the teacher-made tests, two sets of twenty questions were set and distributed to the respondents. The sets of questions were similar and each twenty questions were based on De Saussure and Peirce Semiotic Models. The analyses employed both quantitative and qualitative. In the quantitative analysis, three categorical independent variables were fixed on and Pierre and De Saussaure models, objects of Pierre and De Saussaure models, and diachronicity, trichronicity, categorization and quadratic equations, after satisfying normality and independent assumptions of t-test and ANOVA techniques. The qualitative analysis with ensured anonymity, confidentiality and privacy of respondents and transcribed responses from semi-structured interview guide. The results of the commonest semiotic objects improved significantly classroom interactions with Peirce model than with De Saussure model. They perceived the Peirce model as being broader, comprehensive, universal and ICT-compliant. We therefore recommended further quasi-experimental studies on semiotic objects to improve upon the use of cultural objects.

This study aimed to develop a two-tiers diagnostic test to assess the high school, junior high school, and elementary pre-service teachers about the heat and the temperature concepts in a general physics course. There are two tiers in this test: The first tier composed of six items consisting of multiple-choice questions related to the heat and the temperature, including the correct answer. The second tier of each item contains reasons for students choosing their answer to the first tier. The second tier included four or five responses, one of which is a correct conceptual understanding. The wrong answers, also called distractors, were based on students’ misconceptions. To this end, 128 pre-service teachers from Quebec in Canada completed a pencil-paper questionnaire of sixty minutes duration composing of six questions (four open-ended questions and two multiple choice questions with justifications). As illustrations, the following  conceptual understandings have been identified in our qualitative analysis of the data collected: 1. The change of state of the matter does not require a constant temperature; 2.  The temperature is a measure in degrees to indicate the level of heat of an object or person; 3. The mercury contained in a thermometer expands when it is heated so that the particles which constitute it expand; and 4. The sensation of cold (or warm) is related to the difference in temperature.

In Nigeria, most teachers among other things lack the necessary teaching skills, and mastery of subject matter for effective teaching of mathematics at the secondary school level. These deficiencies have often resulted in high and repeated failure rates in national and standard mathematics examinations. The present study investigated the ability of mathematics teachers to construct practical and realistic word problems in bearing and distance toward mitigating the deficiencies. The research methods adopted were exploratory and descriptive surveys due to the need to explore and analyze the abilities using quantitative techniques. Sample consisted of 292 (35.48%) mathematics teachers who took part in the in-service training workshop organized by the Mathematical Association of Nigeria (MAN) in Plateau state, Nigeria. Purposive sampling technique was used to select the sample that involved the workshop participants only. The instrument ‘construction of practical and realistic word problems in bearing and distance test (CPRWPBDT)’ was used for data collection while the analysis was carried out using simple percentages, mean scores and one-way ANOVA. The findings of the study among other things revealed that the mathematics teacher participants constructed practical and realistic word problems in bearing and distance within 91.67% completion rate, 70.45% of the problems constructed were within the context, at least 75% rate of correctness with little difficulties/errors was observed in sketching (65.90%), and reality (40.90%). The variations observed within the participants in the construction of the problems were statistically not significant. Thus it was recommended among other things that mathematics teachers should undergo regular in-service workshop training to help in developing essential skills themselves for constructing practical/realistic word problems in bearing and distance; and should avoid unnecessary errors for meaningful teaching and learning of bearing and distance.

This study aims to acquaint high school students with the process of modelling in mathematics teaching. The research lasted 5 weeks with a group of (N=36) high school students of Zenica-Doboj Canton (Bosnia and Herzegovina). Students had an opportunity to learn about functions and their properties, and subsequently about mathematical modelling with linear, quadratic, and logarithmic functions. Examples in the research were related to real-world phenomena and processes. The problems were composed of the following subtasks: creating or testing a model, explaining the results, finding the domain and range, and critical thinking about the model. The research identifies the importance of mathematical modelling in teaching. The results display a positive impact of such an approach on students, their thinking, attitude towards teaching, understanding of the materials, motivation and examination scores. The experiences that both students and teachers may have in a mathematical modelling framework could be extremely important for the academic success. A control group of 36 students took the final exam as well. The students of the experimental group got much better results than the students of the control group. Indeed, learning through mathematical modelling has been shown to contribute to all the aspects of students' expected development.

The ability to think critically is a basic competency that must be possessed by students. This study aims to determine the level of critical thinking skills of junior high school students in Bima Regency, West Nusa Tenggara, Indonesia. Various studies have been carried out that explain how important students' critical thinking skills are, but there have not been too many studies on efforts to develop and empower students' critical thinking skills in a practical way. In this thesis, we introduce the technique of empowering students' critical thinking skills by developing a virtual laboratory media based on problem based learning on the material of the human excretory system. In this development, use software construct2 to develop a device which is then integrated with a problem based learning model. It is proven that a virtual laboratory based on problem based learning can improve the critical thinking skills of junior high school students in Belo Kaputen Bima District. We hope that the development of PBL-based virtual laboratory media can improve dramatically, such as the use of 3-dimensional and 4-dimensional software to improve students' understanding of critical and constructive thinking without losing quality.

The focus of this action research was to adapt Bruner’s 3-tier theory to enhance conceptual knowledge of teacher trainees on integer operations. It looks into how learners' conceptual knowledge of integer operations changes over time, as well as their attitudes toward using the 3-tier model. Eighty-two (82) teacher trainees, who were in their first year semester one of the 2020/2021 academic year were purposely selected for the study. Data was collected using test and semi-structured interviews. The study found that using Bruner’s 3-tier theory contributed to substantial gains in conceptual knowledge on integers operations among learners.  It was also found that learners proffered positive compliments about the Concrete-Iconic-Symbolic (C-I-S) construct of lesson presentation and how it built their understanding to apply knowledge on integers operations. Learners also largely proffered positive image about C-I-S construct as it aroused interest and activated unmotivated learners. On these bases, the study concludes that lessons presentations should mirror C-I-S construct in order to alleviate learning difficulties encountered on integer operations. To do this, the study suggests that workshops on lesson presentation using C-I-S construct be organized for both subject tutors, mentors and lead mentors to re-equip their knowledge and to buy-in the idea among others.

This paper reports an exploratory study on the pre-service teachers’ content knowledge on school calculus. A calculus instrument assessing the pre-service teachers’ iconic thinking, algorithmic thinking and formal thinking related to various concepts in school calculus was administered to a group of pre-service mathematics teachers. Their performance on five of the items is reported in this paper. Other than their good performance in the iconic recognition of stationary points, their recognition on points of inflexion, differentiability and notion of minimum points was relatively poor. In addition, they appeared to lack the algorithmic flexibility in testing the nature of stationary points and the formal thinking about definition of an extremum point. The implications of the findings are discussed.  

A mathematics instructor with limited knowledge of content and pedagogy has little room for improvement or novelty in the classroom or the ability to arouse students' interest in learning mathematics. This case study was conducted in a foundation center of one of the public universities in Malaysia. The target of current research was to investigate the influence of lesson study (LS) on lecturers’ pedagogical content and content knowledge. The LS group comprises of seven lecturers of the mathematics group and the researcher. The group collaboratively prepared a research lesson on the subject of even and odd functions. Data gathered through interviews and observations on the lecturers’ activities in discussion meetings. Data from observations and interviews were analyzed descriptively and through thematic analysis method respectively. The results of this study show lecturers improved their knowledge in content and pedagogy considerably about even and odd functions. They enhanced their teaching knowledge through collaborative work and sharing of experiences. It seems the findings of this research not only help lecturers to have better performance in teaching the even and odd functions but also encourage them to experience the LS approach in teaching other mathematical concepts.

The study on mathematical performance was significant enough to be studied further to measure students' self-efficacy. Although studies on student self-efficacy in math performance from a gender perspective were abundant, studies on this relationship from the perspectives of ethnic culture and gender were scarce. Therefore, the objective of this study was to examine the self-efficacy of Bugis Junior High School students in solving math problems based on gender. The researchers used an algebra problem in the context of the Bugis ethnic culture. For this data set, two of 25 students at a public junior high school in Bone, South Sulawesi, Indonesia, were interviewed based on ethnicity and gender. Qualitatively, the triangulation technique was employed for data analysis. The study results revealed that male students outperformed girls in terms of self-efficacy, namely magnitude, strength, and generality, in math performance. Furthermore, female students had lower self-efficacy in terms of confidence, supportive experience in completing math tasks, and confidence in their ability to complete math tasks in similar or different contexts, compared to male students, who had higher self-efficacy. This result provided new knowledge by exploring the characteristics of students' self-efficacy by integrating ethnicity and gender.

This study aims 1) to determine the effectiveness of the Mind-Mapping based Aptitude Treatment Interaction model towards creative thinking and 2) to explain the mathematical creative thinking process based on the creative level. The number of participants was 26 students who took the Multivariable Calculus course in the odd semester of 2020/2021. This research used the mixed-concurrent embedded method. The data collection techniques were validation, observation, creative thinking tests, and interviews. The results showed that 1) the Mind-Mapping based Aptitude Treatment Interaction model was effective in developing creative thinking, as indicated by the average creative thinking score of the experimental class, which was higher than the control class and 2) the characteristics of students mathematical creative thinking process varied following the creative thinking levels. The students mathematical creative thinking level consists of not creative (CTL 0), less creative (CTL 1), quite creative (CTL 2), creative (CTL 3), and very creative (CTL 4). Students at the CTL 2, CTL 3, and CTL 4 can meet the aspects of fluency, flexibility, and originality.

The ability of students to build problem-solving models using procedural knowledge can be viewed from several aspects, including Mastery of Mathematical Problem Solving (MPS), understanding concepts and application of concepts, the relationship between learning outcomes of mathematics and interest in learning, and examine the contribution of the ability to understand concept problems, the application of concepts to the ability of MPS, as well as student difficulties and some of the advantages of students in solving problems. This experimental study aims to explain the effect of the MPS model using procedural knowledge on solving mathematical problems for Junior High School Students (JHSS). The findings showed that 1) The MPS method using procedural knowledge significantly improved learning outcomes, but the mastery of MPS for JHSS was still unsatisfactory. 2) MPS teaching could still not improve meaningful learning outcomes. However, when JHSS applied the concepts, calculations, and problem-solving aspects, MPS teaching improved meaningful learning outcomes. 3) Students' interest in learning mathematics in the two sample classes was classified as positive. Shortly, MPS teaching accustoms students to think systematically and creatively and not just give up on the problems they face.

This study tested hypotheses of a hypothetical model determining the influence of teacher clarity and real-world applications while teaching group theory concepts on students’ achievement in modern algebra. The data collected from 139 undergraduate students were analyzed by regression analysis using Stata14’s structural equation model building and estimation. The path regression analysis of the model using SEM model building and estimation confirmed the research hypotheses. First, the utilization of real-world application problems while teaching group theory concepts has a significant influence on students’ achievement in modern algebra. Second, the clear presentation of group theory concepts by the teacher has a significant influence on students’ achievement in modern algebra. Finally, both teachers’ clear presentation of group theory concepts and utilization of its real-world applications have a significant influence on students’ achievement in modern algebra.

During the Covid-19 pandemic, this study investigated the role of metacognitive awareness as a mediator in the correlation between attitude and mathematical reasoning among undergraduates who are first year university students. These studies distribute mathematical reasoning assessments, metacognitive awareness questionnaires, and attitude surveys as research data. One hundred eighty-four undergraduate students from one public institution in Malaysia's Klang Valley area participated in the research. The impact of metacognitive awareness on attitude and mathematical reasoning was studied using Version 25 of the Statistical Packages for the Social Sciences. The findings indicated that undergraduate mathematics and science education students excelled in non-mathematics and science education students in mathematical reasoning capacity. According to the findings, undergraduate mathematics and science education students had good metacognitive understanding and used more approaches in mathematical reasoning assessment. Further study implies that more research should be conducted to assess different demographics, such as institute training teachers' metacognitive awareness and attitude towards mathematical reasoning.

This study aims to describe the implication of the Aptitude Treatment Interaction (ATI) model integrated with character values to increase the students’ skill in solving mathematics story problems. This study applied a quasi-experimental research type using a non-equivalent control group design involving two classes with 30 students each. Data was collected using a test instrument for solving mathematics story problem. Data were analyzed using n-gain descriptive statistical analysis to see the increase in students' skill in solving mathematics story world problems. The results showed that the average score of student's aptitude in solving mathematics story problems is 91.26 which is in the category of very high. There is an increase in the students’ ability with score of an n-gain of 0.77 which is in the category of high. In addition, the results of observations related to the implementation of learning model of the ATI with a percentage of 87.5% in the category of very good. Thus, the character-based ATI learning model can be used to increase the students’ skill in solving mathematics story problem. In addition, it accommodates the character of students who are concerned with learning mathematics so that learning goals can be achieved both from cognitive and attitudinal aspects.

3D printer technology and 3D design are used in many fields and are gaining various uses day by day. It is seen that the quality of education and training has increased with the effective use of 3D technology in the education and training environment. This study aims to investigate the attitudes of Pre-Service Teachers about the use of 3D printer activities made with Tinkercad in science education. 43 science pre-service teachers participated in the study, which lasted 8 weeks. A mixed research method was used in this study. The problem-solving scale and the attitude scale towards the use of 3D printers in science education were applied to the pre-service teachers. To collect the research data, the attitude scale was applied as a pre-test and post-test. For Paired samples, a t-test was applied and analyses were performed. In qualitative studies, semi-structured student interview questions were applied. According to the findings of the study, there was a significant increase in students' positive attitudes towards the use of 3D printers in science education. Tinkercad and 3D printer trainings have been given and applications have been made within the scope of these trainings. There have been 6 activities related to 3D printers. Thanks to 3D printers, students have the opportunity to present creative ideas and things they imagine to life by making designs in their minds. It seems that abstract concepts related to the sciences are embodied with a 3D printer and turned into tangible objects. Examining a physical object makes it easier for students to identify mistakes they have made in designs. It is seen that they do creative and solution-oriented work against the problems they encounter. Thus, it is predicted that learning will be more permanent and effective.